Need help?Do you have a question about the Iso-Tech IPS 3303S and is the answer not in the manual?
Guides through initial power-up, selecting AC input voltage, and connecting power.
Details setup and use of CH1/CH2, CH3, and CH4 in independent output modes.
Guides on configuring and using the device in tracking series and parallel output configurations.
Guides on connecting and setting up the device for remote control via USB.
Provides a comprehensive list and details of SCPI commands for remote operation.
General| Output Voltage | 0 - 30V |
|---|---|
| Output Current | 0 - 3A |
| Type | Linear |
| Number of Outputs | 1 |
| Protection | Overload, Short Circuit |
| Ripple and Noise | ≤1mVrms |
| Display | LED |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -20°C to 70°C |
| Input Voltage | 220V ± 10% |
To Next Page
