Iso-Tech IPS 4303S User Manual

IPS X303 Series Instruction Manual
22
Output On/Off
Panel operation
Pressing the Output key turns on all channel
outputs.
OUTPUT
OUTPUT
The key LED also turns on. Pressing the Output key again turns the
output and the key LED off.
Automatic output
off
Any of the following actions during output on automatically turns it off.
They might involve sudden and harmful change in the output level.
 Change the operation mode between independent / tracking series /
tracking parallel
 Recalling other setups from the memory
 Storing the setup into the memory
Beep On/Off
Panel operation
By default, the beep sound is enabled. To turn off the
beep, press the CH2 or CH2/CH4 key for 2 seconds.
CH2
BEEP
BEEP
CH2/4
A beep will be heard and the beep setting will be turned off. To enable
the beep, press the CH2 or CH2/CH4 key again for 2 seconds.
List of beep
The following operations beep when the beep setting is on.
 Power on
 INDEP – SER – PARA mode
switching
 Setup save/recall
 Voltage/current knob fine/coarse
switching
 Output on/off
 Panel lock/unlock
 CH1/CH2 output level knob
switching
 Voltage/current level reaching
minimum (zero) level

Iso-Tech IPS 4303S Specifications

General

Brand	Iso-Tech
Model	IPS 4303S
Category	Power Supply
Language	English