7
Measuring L/C/R
The auto test mode is the default mode when the meter is
turned on. When the meter in auto test mode, it will automati-
cally detect the DUT and show the suitable result on the dis-
play.
˙In auto test mode, press the AUTO L/C/R button to enter
manual test mode.
˙In manual test mode, press the AUTO L/C/R button to
select measuring function.
˙To return the auto test mode, press and hold the AUTO
L/C/R button > 2 sec.
Measuring D/Q/θ/DCR
The meter can measure D (dissipation factor), Q (quality
factor), θ (phase) and DCR (DC resistance) on the DUT.
˙Press the D/Q/θ/DCR button to enter D/Q/θ/DCR test mode.
˙In D/Q/θ/DCR test mode, press the D/Q/θ/DCR button to
select measuring function.
To Next Page
Loading...
Need help?
General
