1.2
Unpacking and Initial Inspection
Our shipping department uses custom designed packaging to safely transport your unit. This packaging consists of
independent shipping boxes with custom polystyrene supports for the main unit and the accessory case, both of which
should be saved for future transport needs.
Despite this specialized packing, accidents can still happen in transit. After unpacking the unit, inspect it for any sign of
shipping damage and confirm that your delivery is in accordance with the check list in Figure 1 “unpacking your PLTC-
782”. If you find any damage or that part of the delivery is missing notify Isotech and the carrier immediately. If the unit
is damaged, you should keep the packing for possible insurance assessment.
Figure 1
To Next Page
