1.3
Before You Use the Equipment
Please read the handbook and familiarize yourself with all warnings, hazards and safety information. Regularly inspect the
equipment, accessories and electrical leads. Do not use if there is any sign of damage. Keep the equipment clean, only use
a damp cloth. Do not use solvents or allow liquids to enter the case.
1.4
Summary of Symbols and Abbreviations
ISO3864 – Caution, read the entire manual before use
IEC 417 – Caution, hot surface (risk of burn)
O
Off
l
On
Waste Electrical and Electronic Equipment (WEEE directive) symbol
Complies with European regulations (CE mark)
USB symbol
Risk of Electrical Shock
The Insert is at a Touch Safe Temperature
The Insert is too hot to touch
The Insert is too cold to touch
Unit Under Test
Stability Indicator
Progressing Indicator
To Next Page
