Introduction
This product is designed for use with the iSpring WSP-ARB spin down pre-filtration system.It
enables the system to flush automatically on a preset schedule.
Product Features
• HD touch screen
• 3 flush modes (auto, semi-auto, manual)
• Installs in seconds
• Dual power supply, install with or without wall plug
• Built-in alarm and automatic self-diagnostic system
• Leak free
Warning
• Never clean the surface with bleach or corrosive
cleansing products.
• This product is for indoor use only.
• Any unauthorized modification/alteration to the system will void the product warranty.
iSpring is not responsible for any damages or injuries caused by such modifications.
Specifications
3 x AA battery (included)
Flush 15 seconds every 15 days
Parts list:
Power adapter, circlip, 3 x AA battery, module unit, touch screen control panel, and reset
button
Installation (for WSP-ARB systems without the module pre-installed)
• Prior to installation, inspect the package and make sure that all parts are included.
• After the installation, turn the manual switch on and off to make sure there is no
malfunctionor leak. Contact iSpring support at 678-261-7611 if you have any questions
or concerns.
To Next Page
Loading...
Need help?
General
