8
shows “Loading...”, then the printer turns into work mode when loosen the【POWER】
button. The LCD shows printer parameter.
3.2.2 Switch Off
Under status of switch on, the printer will send out the prompt tone of ‘one high one
low ’ after pressed the【POWER】button, the LCD turns off, then loosen the【POWER】
button, the printer is off.
3.2.3 Self-Test
After receiving the printer, user can check its current setting and status at anytime.
Self-test method is as below: Power off, then hold down the【FEED】button and press
the power button at the same time. Then loosen the【FEED】button and Power button
when you hear ‘one low one high ’prompt tone and LCD shows “Loading...”, the
current setting and status will be printed out.
3.2.4 Paper Feeding (Manual Feeding)
Under the normal work status and using the thermal receipt paper, press【 FEED】
button, the paper feeding begins, and stop when loosen 【FEED】 button. When the
printer uses black mark paper and label paper, press【FEED】button, the printer begins
to feed paper and stops over the position of black mark or label spacing. If the paper is
not the black mark or label paper, the printer stops automatically after feeds paper for
26cm. And also alarm the error if under label paper mode.
3.2.5 Hexadecimal Printing
The function of hexadecimal printing is to print the information received from host
machine by hexadecimal numbers and corresponding characters. It will be
convenient to debug application.
Into hexadecimal printing: Power off, hold down the【MODE】button and press the
power button at the same time. Then loosen the power button and press the【FEED】
button when you hear ‘one low one high’ prompt tone of power on and LCD shows
“Loading...". After that you may loosen the 【MODE】button and 【FEED】 button. The
printer turns into the hexadecimal printing mode and print the presentation.
Quit hexadecimal printing :The way to quit hexadecimal printing mode is switch off the
printer or press the 【FEED】 button for three times and to enter the normal working
mode. The printer will also print the presentation which shows that the printer have quit
hexadecimal printing mode.
To Next Page
Loading...