Isuzu 3CH1-SDZP01 User Manual

SPECIFICATIONS
105
PRINCIPAL ENGINE SPECIFICATIONS
■ 3CH1-NGZG01, 3CH1-SDZP01
*1: May vary depending on the driven machine.
Engine model 3CH1-NGZG01 3CH1-SDZP01
Type Vertical in-line 4-cycle diesel engine
Combustion system Ball-type swirl chamber (IDI)
Aspiration Naturally aspiration
No. of cylinders 3
Bore × stroke mm ø80 × 84
Displacement L1.266
Engine rotation speed min
-1
1800 3000
Continuous rated output
kW 9.7
–
PS 13.2
Rated output (Gross)
kW 10.7 17.8
PS 14.6 24.2
High idling min
-1
1925 3235
Engine weight (dry) kg 130 99/117
Compression ratio 23.1
PTO position Flywheel end
Direction of rotation Counterclockwise viewed from flywheel end
Speed governor Mechanical, centrifugal type (all speed governor)
Cooling system Liquid-cooled with radiator
Lubricating system Forced lubrication with trochoid pump
Normal oil pressure at rated
engine speed
MPa 0.34
Normal oil pressure at low
idle speed
MPa 0.06
Starting system Electric starting (starter motor: DC12 V - 1.1 kW)
Charging system Alternator: 12 V, 40 A
Recommended battery capacity 12 V 433CCA
Starting aids Glow plug (3 or 4 seconds)
Dimensions (L × W × H) mm 567 × 427 × 532523 × 427 × 532
Engine oil pan capa city L 3.4/1.8 (Dipstick upper limit/lower limit)
Engine coolant capacity L 0.9 (Engine only)
Standard cooling fan mm ø335 × 6 blade pusher-type *
1
Crank V-pulley dia./
Fan V-pulley dia.
mm ø110/ø100 *
1
Top clearance mm 0.778 ± 0.069 (consider oil clearance)
TNV_OperationManual_T4(under 19kW).book Page 105 Wednesday, June 17, 2015 11:23 AM

Isuzu 3CH1-SDZP01 Specifications

General

Engine Model	3CH1-SDZP01
Engine Type	Diesel
Number of Cylinders	3
Cylinders	In-line
Cooling System	Water-cooled