9
• Adjusting the volume on any speaker in
the Slave Group will affect the volume only
on the other speaker in its pair, that is L +
R speakers always act together. All other
speakers and wireless main unit will be
unaffected.
• Slave Group speakers power ON and OFF
independently from the wireless main unit
and from each other*.
• Powering ON or OFF any one speaker in the
• Slave Group speakers will not be powered
ON by an active alarm condition on the main
unit.
Slave Group will power ON or OFF only the
other speaker in its pair. All other speakers
and the wireless main unit will be unaffected.
* If you wish to power the wireless main unit ON
or OFF from a speaker con? gured as a member
of the Slave Group, press and hold the power
key on the speaker panel for 4 seconds. The
wireless main unit and this pair of speakers will
power ON or OFF together.
Speaker Set-Up
• Each pair of Slave Group Speakers has its
own volume control, independent of the
main unit and any other pairs in the Slave
Group.
• Adjusting the volume on any speaker in the
Slave Group will affect the volume only on
the other speaker in its pair, that is L + R
speakers always act together. All other
speakers and wireless main unit will be
unaffected.
• Powering ON or OFF any speaker works in
two ways:
- Short press – only the left and right
speaker in the pair are powered ON or
OFF. Wireless main unit and from
every other speaker pair are unaffected.
- Long press – speaker pair, main
unit and other speakers all power ON
or OFF together.
To Next Page
Loading...