it 915 - User Manual

915/ 965 MOTHER BOARD WITH A 9500 VIDEO CARD GUIDE
915/965 MOTHERBOARD WITH A 9500 VIDEO CARD CONNECTION GUIDE
Golden Tee LIVE™ www.itsgames.com 847.870.7027 8/20/09 1 | Page
©2009 Incredible Technologies, Inc. All Rights Reserved. Non-IT trademarks are the properties of their owners and used for illustration only.
All information herein is Confidential. Unauthorized duplication or disclosure may violate applicable laws or agreements.
915/965 Motherboard with a 9500 Video Card Connection Guide
Because the system box that originally shipped with your GT LIVE may need to be replaced,
some video connections that worked with the previous Nighthawk system box may now need to
be adjusted. The most recent motherboard is the DG31PR, which has a 9500 video card with an
HDMI port. Audio and video is provided via HDMI cable. The 9500 video card only works with
Golden Tee 2009 courses or higher.
This guide focuses on setting up system boxes with the 915/965 motherboard. HDMI audio is
not enabled for system boxes with the 915/965 motherboard.
To determine the correct video and audio connections for your new system box, it is necessary
to:
1. Identify the system box motherboard and video card combination. Use the Nighthawk
System Box Configuration Table on page 2 to help with identification.
Note: The 915 and 965 motherboards have a different arrangement of ports, but the
functionality is identical, so they are referred to as one type of motherboard:
915/965.
2. Identify the video card. A 9500 will have an HDMI port on the top. The older video cards,
7600 or 6600, will have a round display port above the 2
nd
monitor output for component
video.
7600 Video Card with Display Port 9500 Video Card with HDMI Port
3. Identify the best video and audio configuration for your equipment.
 CRT MONITOR - Use the DVI to VGA adaptor from the DVI port on the system box
and connect to the VGA port on the monitor. Audio - Use the system box RCA audio
out to the I/O board RCA audio in, with speakers connected to the I/O board.
 HDTV - Capable of VGA, DVI or DVI to HDMI video. Audio - Use the system box
RCA audio out directly to the HDTV audio system or to the I/O board, using cabinet
speakers connected to the I/O board.

Summary

Identifying System Components

Identify Motherboard and Video Card

Determine system box motherboard and video card combination using Nighthawk System Box Configuration Table.

Determine Video and Audio Configuration

Identify the best video and audio setup for your equipment based on monitor type.

Identifying Motherboard and Video Card

Nighthawk System Box Configuration Table

Diagrams illustrating differences between system boxes (DG31PR, D965, D915) with a 9500 video card.

Primary Monitor Video and Audio Connections

HDTV VGA Method

Connect system box to HDTV via VGA, using DVI to VGA adapter for video, RCA for audio.

CRT VGA Method

Connect system box to CRT monitor via VGA, using DVI to VGA adapter for video, RCA for audio.

DVI to HDMI Method

Connect system box to HDTV via DVI to HDMI for secondary video display.

HDMI to HDMI Video Connection

HDMI to HDMI Connection for Single Monitor

Connect system box to HDTV via HDMI cable for single monitor output.

Monitor Application DIP Switch Settings

HDTV Monitor Application Settings

Configure DIP switches for HDTV resolution, aspect ratio, and secondary monitor settings.

CRT Monitor Application Settings

Configure DIP switches for CRT monitor resolution, refresh rate, and operator settings.

Secondary Monitor and Audio Connections

Secondary Monitor Video Connection

Connect a second monitor to the upper VGA port for secondary information or duplicate display.

Audio Connections

Connect audio to HDTV speakers or external speakers via the I/O board using RCA cables.

it 915 Specifications

General

Brand	it
Model	915
Category	Motherboard
Language	English