EasyManua.ls Logo

Italkero ETNA - Specifications

Italkero ETNA
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Specification
The gas fireplace is designed to work with the following gas types.
Model:
Qogir MKIII (ETNA)
Appliance
categories:
I
3+
I
3B/P(30)
□I
3B/P(50)
Type of gas: Butane / Propane LPG mixtures LPG mixtures
Gas
pressure:
Butane : 28 30 mbar
Propane : 37 mbar
28-30 mbar 50 mbar
Total heat
input:
7.3 kW (G30:531 g/h
G31:522 g/h)
7.3 kW (531 g/h) 7.3 kW (531 g/h)
Injector
size:
1.32 mm
Pilot: 0.25 mm
1.32 mm
Pilot: 0.25mm
1.18 mm
Pilot: 0.18mm
Countries of
destination:
BE, CH, CY, CZ, ES, FR,
GB, GR, IE, IT, LT, LU, LV,
PT, SK, and SI
BE, BG, CY, DK, EE,
FI, FR, HR, HU, IS, IT,
LT, LU, MT, NL, NO,
RO, SK, SI, SE and TR
AT, CH, DE and SK
PIN: 0063CS7870
Serial
number:
This appliance is not for domestic use.
WARNING: Accessible parts may be very hot. Keep young children away.
Read the instructions before using this appliance. The appliance must be installed in
accordance with the instructions and local regulations
Close the valve of the gas cylinder or the regulator after use.
The use of this appliance in enclosed areas can be dangerous and is PROHIBITED.
For use outdoors or in amply ventilated areas.
An amply ventilated area must have a minimum
of 25 % of the surface area open. The surface area
0063
is the sum of the walls surface.