GETTING STARTED
Please read instruction thoroughly before using the appliance.
The gas heater will arrive in one box containing the appliance with burner already installed, castor wheels,
surrounding safety glass, glass or lava rock fuel beds.
Remove the appliance from packaging. Carefully place it down on the floor, keeping it upright for ease of
assembly.
Extreme care should be taken when handling the heater, to ensure the gas pipes, thermocouple lead, gas
valve or burner are not damaged or loosened in anyway.
Please note: ALL heaters have been burn tested and leak tested prior to leaving the factory. Although each
unit is cleaned, there may be the odd scorch mark around the pilot and main burner gas jets.
WHAT’S INCLUDED
Appliance Heater
Castor Wheels
Surrounding Safety Glass
and Brackets
Glass Bead & Lava Rock
Fuel Beds
To Next Page
Loading...