ITATOOLS ITA 25 - User Manual

MANUALE D’USO – OPERATION MANUAL – NOTICE D’INSTRUCTIONS
BETRIEBSANLEITUNG – MANUAL DE USO
ITA 25
TENDIREGGIA A BATTERIA PER REGGIA IN PLASTICA
BATTERY POWERED PLASTIC STRAPPING TOOL
APPAREIL DE CERCLAGE À BATTERIE POUR FEUILLARD EN PLASTIQUE
AKKU KUNSTSTOFFBAND UMREIFUNGSGERÄT
FLEJADORA CON BATERÍA PARA FLEJE DE PLÁSTICO
LEGGERE LE ISTRUZIONI PRIMA DI UTILIZZARE L’APPARECCHIO
READ ALL INSTRUCTIONS BEFORE OPERATING THE TOOL
AVANT D’UTILISER L'APPAREIL LIRE LA NOTICE D’INSTRUCTIONS
VOR DER INBETRIEBNAHME DES GERÄTES DIE BEDIENUNGSANLEITUNG LESEN
LEA LAS INSTRUCCIONES ANTES DE UTILIZAR EL APARATO
Ed. 03-16 from sn 25022616

Summary

Safety Instructions and Precautions

General Safety Guidelines

Covers safety icons, general operating rules, and personal protective equipment.

Technical Specifications

Dimensions, Performance, and Power Data

Details technical data including dimensions, weight, performance metrics, and power requirements.

Installation Procedures

Battery and Charger Installation

Battery Safety and Technical Data

Battery Handling and Charging Safety

Safety precautions for using, charging, and handling the lithium-polymer battery.

Battery Charger Operation

Charger Safety and Setup

Safety instructions and initial setup procedures for the battery charger.

Battery Charger Status Indicators

Understanding Signal Codes

Operating Elements and Adjustments

Tension and Welding Settings

Adjusts strap tension and welding parameters for optimal results.

Selecting Operating Modes

Guides through automatic, semi-automatic, and manual strapping modes.

Welding Area Adjustment

Fine-tunes the weld area for uniform strap sealing.

Strap Size Conversion

Seal Quality Control

Performing Seal Quality Checks

Visual inspection methods to ensure the quality and integrity of the strap seal.

Maintenance and Cleaning

General Cleaning Procedures

Instructions for routine cleaning of the tool using compressed air.

Feedwheel Cleaning and Replacement

Strap Locker Plate Cleaning and Replacement

Troubleshooting Common Issues

Tool Not Activating

Addresses issues when the tool fails to power on after battery insertion.

Insufficient Strap Tension

Solutions for when the strap is not being tensioned properly.

Feedwheel Slipping

Strap Breaking During Tensioning

Strap Sideways Bending;Misalignment

Tool Sliding Forward During Tensioning

Spare Parts List

Component Part Identification

ITATOOLS ITA 25 Specifications

General

Brand	ITATOOLS
Model	ITA 25
Category	Tools
Language	English