EasyManua.ls Logo

ITC TS-3400MIXD - Auto Gain

Default Icon
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 11 -
the automix algorithm. The parameter ranges from 1 to 10. The larger the value, the higher the
priority. The effect of this parameter on gain sharing mixing is that when the sound of the two
microphones is the same, the higher priority is assigned with more gain than the lower priority. The
effect on the gate auto mixing is that when the sound of two microphones exceeds the threshold,
the one with higher priority will be selected for mixing first.
Mute: This microphone will be muted. It will still participate in the smart mix, but the sound of the
microphone will not be output.
4.2 Auto Gain
4.2.1 The purpose of the auto gain is to maintain the signal at a target level while maintaining
dynamics. The application scenario is as follows: When the speaker is slightly away from the
microphone, the sound picked up by the microphone will be smaller than the normal distance of
the speech. At this time, the auto gain will slightly be increased. Since it is a live sound
reinforcement, this gain cannot be increased infinitely, because it will cause howling or other
unfavorable situations, and only a certain amount of compensation can be made. When the speaker