Car Wave Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 86
CARWave:SAE[:TEST]:5:VOLTage[:LEVel]
This command is used to set voltage system of SAEJ1113-11 TEST 5
Command syntax
CARWave:SAE:5:VOLT < 12V|24V >
Arguments
12V|24V
Reset Value
12V
Example
CARWave:SAE:5:VOLT 12V
Query syntax
CARWave:SAE:5:VOLT?
Returns
<CRD>
CARWave:LV124:E02[:STATe]
This command is used to simulate LV124 E02 wave.
Command syntax
CARWave:LV124:E02 <bool>
Arguments
ON|OFF|1|0
Reset Value
0
Example
CARWave:LV124:E02 1
Query syntax
CARWave:LV124:E02?
Returns
0|1
CARWave:LV124:E04[:STATe]
This command is used to simulate LV124 E04.
To Next Page
Loading...
Need help?
General
