Need help?Do you have a question about the ITech IT6512A and is the answer not in the manual?
General| Output Current | 0-12A |
|---|---|
| Voltage Resolution | 10mV |
| Current Resolution | 1mA |
| Load Regulation (CV) | 0.01% + 2mV |
| Line Regulation (CV) | 0.01% + 2mV |
| Line Regulation (CC) | 0.01% + 2mA |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Current Accuracy | 0.1% + 5mA |
| Ripple & Noise (CC) | 3mArms |
| Temperature Coefficient | 100ppm/°C |
| Interface | USB, RS232, LAN |
| Display | 4.3" TFT LCD |
Check package contents upon delivery for completeness and damage.
Procedure for performing the power-on self-test for normal operation verification.
Steps to verify basic voltage and current output functions without load.
Methods for setting the output voltage value using front panel controls.
Methods for setting the output current value using front panel controls.
How output voltage and current are adjusted using various controls.
Navigation and operation within the power supply's menu system.
Configuration of Over Voltage, Over Current, and Over Power protections.
Instructions for connecting multiple units in series or parallel configurations.
Comprehensive list of electrical and physical specifications for the power supply models.
To Next Page
