Need help?Do you have a question about the ITech IT6723B and is the answer not in the manual?
General| Output Voltage | 0-72V |
|---|---|
| Output Current | 0-3A |
| Power | 216W |
| Efficiency | ≥85% |
| Protection Features | OVP, OCP, OTP |
| Voltage Resolution | 10mV |
| Current Resolution | 1mA |
| Current Accuracy | ≤0.1% + 5mA |
| Load Regulation (CC) | ≤0.1%+5mA |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 70°C |
| Ripple and Noise (CC) | ≤3mArms |
| Relative Humidity | ≤80% RH |
Signs indicating danger, requiring attention during operations to prevent improper steps or loss of important data.
Signs indicating danger, requiring attention during operations to prevent personal casualties from improper steps.
ITECH provides one-year warranty for product materials and manufacturing, outlining service and repair terms.
Outlines circumstances where warranty service does not apply, such as customer modification or accidental damage.
General safety guidelines to be followed during instrument operation to prevent violations of safety standards.
Specifies the required indoor environment and low condensation areas for using the IT6700 series power supply.
Lists applicable European Directives and product standards for Electromagnetic Compatibility (EMC).
Explains the power-on self-test procedure and how to handle potential error information displayed on the VFD.
Provides steps to verify basic voltage and current output functions of the power supply.
Describes the Over Voltage Protection feature and how to set its level to prevent damage.
Lists key technical specifications such as rated values, load/line regulation, and accuracy for IT6700 series.
Details the RS232 interface, including data format, baud rate, and connection pinout.
To Next Page
