ITech IT6724 User Manual

IT6700 User manual
User Manual
1
USER’S MANUAL
Programmable HV Power Supply
Model IT6700 Series
IT6723/IT6724/IT6723C
/IT6724C/IT6723B/IT6724B/IT6726B
/IT6723H/IT6724H/IT6726H
/IT6723G/IT6724G/IT6726G/IT6726V
©Copy
right All Rights Reserved
Ver1.1/OCT, 2012/ IT6700
Via Acquanera, 29 22100 Como
tel. 031.526.566 (r.a.) fax 031.507.984
info@calpower.it www.calpower.it

ITech IT6724 Specifications

General

Brand	ITech
Model	IT6724
Category	Power Supply
Language	English

Summary

Product Safety and Compliance

Safety Regulations and Prohibitions

Rules for safe operation and usage restrictions.

Understanding Safety Symbols

Explanation of warning and note symbols for user safety.

Product Certification and Assurance

Confirms compliance with technical specifications.

Product Warranty Information

Details the product warranty period and terms.

Product Introduction

Inspection and Installation

Initial Inspection Procedures

Procedures to check the power supply upon receipt.

Rack Mounting Instructions

Instructions for mounting the unit in a 19-inch rack.

Power Supply Dimensions

Physical dimensions of the IT6700 series power supply.

Quick Start Guide

Front and Rear Panel Overview

Overview of front and rear panel components and their functions.

Front Panel Key Functions

Detailed explanation of the functions of each key on the front panel.

VFD Display Indicator Meanings

Explanation of the VFD display indicators and their meanings.

Power On and Output Checks

Pre-Power On Safety Checks

Safety guidelines and initial checks before powering on the unit.

Power Supply Activation

Steps to verify AC power and correct voltage setting.

System Self-Check Procedures

How the unit performs self-checks and displays status.

Output Performance Verification

Procedures to verify output functionality and response.

Voltage Output Verification (No Load)

Steps to check voltage output without load.

Current Output Verification (Short Circuit)

Steps to check current output using a short circuit.

Technical Specifications

Main Technical Parameters

Detailed technical specifications for various IT6700 models.

Supplementary Technical Data

Additional parameters like memory, power input, and calibration frequency.

Basic Operation Procedures

Local and Remote Mode Control

How to switch between local and remote control modes.

Setting the Output Voltage

Procedures for setting the output voltage using the front panel.

Setting the Output Current

Procedures for setting the output current using the front panel.

Output On/Off Control

How to enable or disable the power supply output.

Displaying Set vs. Actual Values

How to toggle between displaying set and actual output values.

Voltage, Current, and Power Limits

How voltage, current, and power limits interact during adjustment.

Saving and Recalling Settings

How to save and recall frequently used parameter settings.

Triggering Output Sequences

How to initiate output sequences using manual or BUS triggers.

Navigating the Menu System

Introduction to navigating and using the device's menu system.

Menu Item Overview

Overview of menu items and their basic functions.

Specific Menu Function Details

Detailed explanation of specific menu settings like MAX VOLT, OCP, P-MEM, P-OUT.

Over Voltage Protection (OVP)

How to set and use Over Voltage Protection.

Front Panel Key Lock

How to lock/unlock the front panel keys.

Remote Sense Feature Usage

How to use the remote sense feature for accurate voltage control.

Remote Operation and Communication

RS232 Communication Setup

How to connect and configure the RS232 communication interface.

USB Communication Setup

How to connect and program the power supply using USB.

GPIB Communication Setup

How to connect and configure the GPIB communication interface.