IT6700 User manual
User Manual
23
Radiating mode :Fans
Operation temperature:0 to 40 °C
Storage temperature:-20 to 70 °C.
Humidity :Max humidity: 80%
Chapter5 Basic operation
This chapter will introduce the basic operation of IT6700 series power supply,including the
following subdivisions:
Local/remote mode
Voltage setup
Current setup
Output on/off operation
Setup value/actual value switching
Voltage/current/power adjustment
Save/recall operation
Trigger operation
Menu operation
OVP protection function
Key lock function
Remote sense function
5.1 Local/Remote Mode
Local button can enable you switch mode from remote to local mode.
After you power on the power supply, the power supply’s default mode is local mode, all
the buttons can be used in this mode. While in remote mode, you can’t operate through front
panel directly except Meter and Local keys. Local and remote mode can be controlled
through PC. In addition, the mode changing will not influence the output parameters.
5.2 Voltage Setup
You can set voltage within the range of rated voltage value. When you press
V-setV-set
button, the button will be lit. This indicates that you can set voltage. There are three ways to
set output voltage through front panel.
The first way: press
V-setV-set
,adjust cursor location through button, pressing
and will enable you to adjust the setting voltage value.
The second way: press
V-setV-set
, adjust cursor location through button, adjust
rotary knob to change the setting voltage value.
The third way: press
V-setV-set
button and number key(
0
to
9
) to set voltage value
To Next Page
Loading...
