Need help?Do you have a question about the ITech IT6942A and is the answer not in the manual?
General| Model | IT6942A |
|---|---|
| Type | Programmable DC Power Supply |
| Voltage Resolution | 1mV |
| Current Resolution | 1mA |
| Operating Temperature | 0°C to 40°C |
| Output Voltage | 0-60V |
| Load Regulation (CV) | ≤0.01% + 2mV |
| Line Regulation (CV) | ≤0.01% + 2mV |
| Interface | RS232/USB/LAN/GPIB(Optional) |
| Display | LCD |
| Protections | OVP, OCP, OTP |
Defines safety symbols like CAUTION, WARNING, and NOTE for safe operation.
Explains common safety signs used in the manual, like direct current and power symbols.
Provides essential safety precautions for instrument operation to prevent hazards.
Guidance on selecting and connecting the appropriate power cord for the instrument.
Steps for performing the self-test upon powering on the instrument.
Guidance on diagnosing and resolving issues if the power supply fails to start normally.
Describes three ways to set the output voltage and current using front panel controls.
Explains how output voltage/current are determined by power limits and load.
Configuring Over Voltage Protection (OVP) and activating the keypad lock feature.
Setting up the RS232 interface for communication with a computer.
Connecting and programming the power supply using the USB interface.
Detailed specifications for rated values, regulation, resolution, and accuracy across models.
Details technical parameters for IT6933A, including AC input, rise/fall times, and transient response.
Provides specifications for IT6952A and IT6953A models, including dimensions and weight.
Provides specifications for IT6922B and IT6932B models, including dimensions and weight.
Provides specifications for IT6933B model, including temperature coefficients and working conditions.
Provides specifications for IT6942B and IT6952B models, including dimensions and weight.
Provides specifications for IT6953B model, including dimensions and weight.
To Next Page
