Need help?Do you have a question about the ITech IT6300 and is the answer not in the manual?
General| Model | IT6300 |
|---|---|
| Output Channels | 3 |
| Current Range (CH1) | 0-3A |
| Current Range (CH2) | 0-3A |
| Voltage Range (CH3) | 0-5V |
| Current Range (CH3) | 0-3A |
| Power | 195W |
| Current Resolution | 1mA |
| Display | LCD |
| Operating Temperature | 0°C to 40°C |
| Type | Programmable DC Power Supply |
| Current Accuracy | ±0.1% + 5mA |
| Ripple & Noise (CC) | ≤3mArms |
| Interface | RS232, USB |
Details conditions that invalidate the product warranty.
Lists EMC standards the product conforms to.
Lists safety standards the product conforms to.
Provides an overview of remote configuration methods.
Introduces SCPI as a communication standard for instruments.
Explains the two main command types: common and subsystem.
Details SCPI command syntax, including case sensitivity and long/short forms.
Describes the different data types used in SCPI messages and responses.
Outlines the available communication interfaces (RS232, USB, GPIB, LAN).
Explains the setup and configuration for the RS232 communication interface.
Details how to connect and use the USB interface for communication.
Covers the connection and configuration of the GPIB interface.
Describes the LAN interface setup, including IP addressing and configuration.
To Next Page
