Do you have a question about the ITech IT6900 Series and is the answer not in the manual?
Brand | ITech |
---|---|
Model | IT6900 Series |
Category | Power Supply |
Language | English |
Discusses the warranty and liability terms for the manual and product.
States that software/hardware use is subject to licensing terms.
Outlines permissions for U.S. government use of software and data.
Details the one-year warranty service provided by the manufacturer.
Lists conditions under which the product warranty becomes invalid.
Explains various safety symbols used in the manual and on the equipment.
General safety guidelines to be followed during instrument operation.
Specifies the required environmental conditions for instrument operation.
Information on CE and UKCA compliance tags.
Guidelines regarding the disposal of electronic equipment.
Lists applicable European Directives and product standards.
Procedure to check all items included in the product package.
Details physical dimensions and installation space requirements.
Guidance on selecting and connecting the appropriate power cord.
Overview of IT6900 series power supplies and their features.
Description and labeling of the instrument's front panel components.
Identifies and describes the connectors and interfaces on the rear panel.
Steps for performing the initial self-test upon powering on the unit.
Procedures for setting the output voltage using the front panel.
Procedures for setting the output current using the front panel.
Navigating the menu system and its various settings.
Understanding and setting the Over Voltage Protection (OVP) feature.
Using external analog signals to control voltage, current, and ON/OFF.
Details on connecting and configuring the RS232 communication interface.
Instructions for connecting and programming the power supply via USB.
Information on multi-unit control using the RS485 interface.
Comprehensive list of key technical specifications for IT6900 series.
Additional characteristics like storage capacity and calibration frequency.
Details on optional test lines, including current capacity and cross-section.