ITech IT6832A - Product Assurance and Safety; Warranty Limitations; Safety Symbols Explained

IT6800A/B Programming Guide
Copyright © Itech Electronic Co., Ltd. i
Quality Certification and Assurance
We certify that series IT6800A/B power supply meets all the published
specifications at time of shipment from the factory.
Warranty
ITECH warrants that the product will be free from defects in material and
workmanship under normal use for a period of one (1) year from the date of
delivery (except those described in the Limitation of Warranty below).
For warranty service or repair, the product must be returned to a service center
designated by ITECH.
 The product returned to ITECH for warranty service must be shipped
PREPAID. And ITECH will pay for return of the product to customer.
 If the product is returned to ITECH for warranty service from overseas, all
the freights, duties and other taxes shall be on the account of customer.
Limitation of Warranty
This Warranty will be rendered invalid in case of the following:
 Damage caused by circuit installed by customer or using customer own
products or accessories;
 Modified or repaired by customer without authorization;
 Damage caused by circuit installed by customer or not operating our
products under designated environment;
 The product model or serial number is altered, deleted, removed or made
illegible by customer;
 Damaged as a result of accidents, including but not limited to lightning,
moisture, fire, improper use or negligence.
Safety Symbols
Direct current
ON (power on)
Alternating current
OFF (power off)
Both direct and alternating
current
Power-on state
Protective conductor terminal
Power-off state
Earth (ground) terminal
Reference
terminal
Caution, risk of electric shock
Positive terminal
Warning, risk of danger (refer
to this manual for specific
Warning or Caution
information)
Negative terminal