Need help?Do you have a question about the ITech IT7803-350-30U and is the answer not in the manual?
General| Cooling | Forced Air Cooling |
|---|---|
| Output Voltage | 0-350V AC |
| Output Current | 0-30A |
| Voltage Range | 0-350V AC |
| Current Range | 0-30A |
| Efficiency | ≥85% |
| Protections | Short Circuit |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 0~80%RH, non-condensing |
Procedure for correctly connecting the power cord to the instrument.
Procedure for powering on the instrument and initial checks.
How to control the power output on/off using the instrument.
Guide to selecting single-phase, three-phase, reverse, or multi-channel modes.
Instructions for choosing between AC, DC, AC+DC, and DC+AC output modes.
Overview of the system menu structure and navigation.
Detailed parameters available in the configuration menu.
Configuring overcurrent, voltage, and temperature protections.
Displaying basic electrical measurement parameters.
Visualizing voltage and current waveforms.
Creating and managing output waveform sequences.
Detailed technical specifications for IT7800 series models.
To Next Page
