Need help?Do you have a question about the ITech IT7806-350-90 and is the answer not in the manual?
General| Rated Power | 6kVA |
|---|---|
| Output Power | 6kVA |
| Efficiency | >85% |
| Cooling Method | Forced air cooling |
| Frequency Range | 50Hz/60Hz |
| Operating Temperature | 0-40°C |
| Storage Temperature | -20-70°C |
| Humidity | 0~90%RH, non-condensing |
| Input Frequency | 50Hz/60Hz |
| Protection Features | Over voltage, over current, over temperature, short circuit |
Explanation of the function of each key on the front panel.
Step-by-step guide to safely connect the power cord.
Instructions for connecting test leads to the DUT.
Procedure for powering on the instrument and initial self-test.
How to configure voltage, frequency, and other output settings.
Instructions for enabling and disabling the instrument's output.
Choosing between single-phase, three-phase, and multi-channel modes.
Configuring the output as AC, DC, AC+DC, or DC+AC.
Guide to navigating the instrument's system menu structure.
Detailed settings for DC, AC, and AC+DC output configurations.
Configuring overcurrent, voltage, temperature, and power protection.
Configuring multiple instruments for parallel operation.
Using the instrument as a basic meter for electrical energy parameters.
Displaying, analyzing, and capturing voltage and current waveforms.
Measuring and analyzing harmonic distortion parameters.
Creating and managing sequences of AC waveforms with varying amplitudes.
Key electrical and performance specifications for all IT7800 models.
Connecting and controlling the instrument via USB communication.
Configuring and using the instrument's LAN interface for network control.
To Next Page
