Need help?Do you have a question about the ITech IT7800 Series and is the answer not in the manual?
General| Brand | ITech |
|---|---|
| Model | IT7800 Series |
| Category | AC Power Distribution |
| Language | English |
Electromagnetic Compatibility standards the instrument complies with.
Safety standards the instrument adheres to.
Overview of IT7800 series features and applications.
Description of the IT7800 front panel components and layout.
Explanation of the IT7800 series keyboard layout and key functions.
Details on the function and operation of the push-on knob.
Explanation of the IT7800 series rear panel connectors and ports.
Overview of the IT7800 series home screen interface and navigation.
Information on optional accessories available for the IT7800 series.
Instructions for safely unpacking and transporting the instrument.
Steps to verify shipment contents and check for damage.
Dimensions and physical specifications of the IT7800 series instruments.
Procedures for connecting the power cord and AC input.
Guidance on connecting test lines and the DUT.
Instructions for installing fiber optic cables for specific models.
Steps and precautions for powering on the instrument.
Explanation of the touch screen interface and navigation.
How to set voltage and frequency output parameters.
Instructions for controlling the output power on and off.
How to select single-phase, three-phase, reverse, or multi-channel modes.
How to select AC, DC, AC+DC, or DC+AC output modes.
How to select and configure output waveforms.
Explanation of the auto-ranging feature for voltage and current.
Understanding the output voltage and current characteristics.
How to set and use current and power limit modes.
Using the sweep function to test efficiency and parameters.
Using the instrument as a power amplifier.
Simulating AC grid impedance.
Configuring multi-phase output using system bus or digital IO.
Using standard IEC regulation test curves and customization.
Overview of the system menu and its options.
Detailed configuration settings for DC, AC+DC, and AC modes.
How to lock and unlock the instrument's keyboard.
How to switch between local and remote control modes.
Procedures for saving and recalling instrument settings.
Setting up overcurrent, voltage, and temperature protection functions.
Capturing and saving screen images to a USB disk.
Configuring trigger sources and modes for events.
Accessing and viewing system operation logs.
Using the energy statistics function.
Configuring multiple instruments for parallel operation.
Setting up and using remote measurement and sensing.
Configuring digital I/O pins for control and signaling.
Using optional analog interfaces for control and monitoring.
Using the instrument as a basic meter for electrical measurements.
Displaying and analyzing voltage and current waveforms.
Measuring and analyzing harmonic parameters.
Recording and observing output status data over time.
Creating and executing sequences of AC waveforms using List files.
Simulating surge and sag for abnormal voltage fluctuations.
Customizing and saving user-defined output waveforms.
Importing and simulating voltage signals using waveform files.
Detailed technical specifications for IT7800 series models.
Additional characteristics like calibration and cooling.
Connecting and configuring the instrument via USB.
Connecting and configuring the instrument via LAN interface.
Configuring and using the CAN communication interface.
Setting up and using the optional GPIB interface.
Setting up and using the optional RS-232 interface.
Overview of common SCPI commands for remote operation.
Information on control software for remote operation.
To Next Page
