ITech IT7800 Series

Operation and Application
Copyright ©ITECH Electronic Co., Ltd. 42
⚫ Sine
⚫ Square
⚫ Sawtooth
⚫ Triangle
⚫ Trapezoid
⚫ Clipped-sine
⚫ THD wave
⚫ User-defined
When Trapezoid, Clipped-sine, THD Wave and User-define are selected, the
user should configure the parameter of waveform.
4.4 Auto-range Function
IT7800 series power supply can achieve the combined output of multiple voltage
and current at a fixed power. Single power supply can meet different DUT tests
with high voltage low current or high current low voltage, at the same time,
because the output of voltage and current is controlled by the limit power, it will
show the switching of voltage and current auto ranging. To avoid Intermittent
output shutdown when switching the high range and low range.