ITech IT7800 Series User Manual

Operation and Application
Copyright ©ITECH Electronic Co., Ltd. 50
4.11 Standard IEC Regulations
IT7800 series AC/DC power supplies provide standard test curves in
accordance with IEC 61000-4-11/4-13/4-14/4-28 regulations. It can be invoked
directly by the user when testing IEC compliance tests.
This function provides both the test curve that meets the standard requirements
of regulations and the curve customization function. Users can customize the
curve according to the project requirements of regulations and perform the
extended test of the test object.
Click Standard on the Menu screen or directly press Shift+ (Standard)
to enter the regulation test screen.
NOTE
For parameters of corresponding curves and related regulations, refer to
IEC standards.
Interface Instruction
Take IEC 61000-4-11 as an example to introduce the interface display and how
to use the regulation test.The usage method of other regulatory interfaces is the
same, but the displayed parameters are different.
Standards Selection Area
Standards Edit Area

ITech IT7800 Series Specifications

General

Brand	ITech
Model	IT7800 Series
Category	AC Power Distribution
Language	English