EasyManua.ls Logo

iTechworld PS2000 - Charging Methods and Inputs; PV;Solar Panel Charging; AC Wall Charging

iTechworld PS2000
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
PV/Solar Input
Use the included 25A Anderson to 50A Anderson conversion cable to
connect your solar panel.
As for PV input, the maximum input of the solar panel is up to 500W
and the maximum voltage is up to 50V (Do not exceed 50V).
AC Input
Use the included wall socket to get 1100W fast charging , which can
fully charge the PS2000 from 0 to 100% in 2 hours.
Notice:
1.The PS2000 should be charged directly by the wall socket, please
do not use extension cords.
2.Please do not plug several devices together using a power board,
the current will be too high , damaging your cable and potentially
cause a fire risk.
3.Do not use the same socket
to connect other devices when charging
the PS2000. When a socket in a general household exceeds 1500W,
the safety circuit breaker will activate.