SERVICE MANUAL
B-45
Step 58
Gently press 2 dowel pins in Crankcase. and Place Rear cover gasket
and Rear Cover .
Step 60
Fit oil channel Plug M18x1.5 using sealing washer18x24x1.5 (Cu)
& sealent to plug main oil gallery from rear side
Step 59
Place Rear cover gasket using sealent & Tight rear cover using five screws
of M8x25 and 2 screw M8x30 alongwith spring washer .
IMP:- Place rear cover carefully on crankcase to avoid seal damage.
Step 61
Fit splash guard on front side of Timing Gear on crank shaft
ITL
To Next Page
Loading...