SERVICE MANUAL
B-47
Step 64
Fit front cover oil seal
Dia. 52x72x12. in Front Cover and lubricate oil Seal.
Step 65
Fit Transmission elbow with gasket using two screw of
M8x20 and spring washer B-8
Step 67
Fit Engine Belt Pulley carefully aligning Keyway and Key.
Tighten crank pulley using nut M32x1.5 & torque up to
25Kg-m.
Step 66
Fit cover for front cover (FIP Side) with three screws
M8x16 and spring washers B-8
ITL
To Next Page
Loading...