22
22
While the Ryodoraku point measurement mode
is actived, the measurement values can be
held. The unit displays 200 as the maximum
measurement value. The unit displays a value
when the probe is applied to the surface of the
skin. This value is retained when the probe is
removed from contact with the skin.
A held measurement value can be recorded by
pressing the Store key, or the Stimulation
button of the probe.
The unit stores 24 values (d1–d24).
To recall a stored value, press the Recall
key. The stored values will be displayed
sequentially in order of the measurements
(beginning with the oldest value) each time
the Recall key is pressed. The left LCD
displays the measurement data, while the
center LCD indicates memory Nos. from d1
to d24.
Note:
When 24 values have been stored, the unit stops storing.
Store Key
Stimulation
button
Recall key
1
2
3
To Next Page
Loading...