D2035928-AI_EU_Declaration_DELTA.docx
EU Declaration of Conformity
Itron GmbH
Hardeckstrasse 2
D-76185 Karlsruhe
Declares under his sole responsibility that the products Rotary Meters DELTA and
DELTA S-Flow are designed and manufactured in conformity with the following Directives:
1. 2014/68/EU (PED) - Modules B+D Category IV
- DIN EN 12480:2018
Certificate: DVGW CE-0085BM0420
The module D is supervised by:
#0036 TÜV SÜD Industrie Service GmbH, Westendstr. 199, D-80686 München
The used fluids are classified in group 1 according article 13.
Certificate: DGR-0036-QS-955-20
2. 2014/30/EU (EMC)
- EN 60947-5-2:2018
- EN 61000-6-2:2019
- EN 61000-6-3:2007/A1:2011/AC:2012
3. 2014/34/EU (ATEX)
- EN 60079-0:2019
- EN 60079-11:2012
- EN ISO 80079-36:2016
- EN ISO 80079-37:2016
Certificate: LCIE 06 ATEX 6031 X
II 1/2 G Ex ia IIC T5 Ga / Gb h T6
#0081 LCIE 33 avenue General Leclerc, F-92266 Fontenay-aux-Roses
The module D is supervised by:
#0123 TÜV SÜD Product Service GmbH, Ridlerstr. 65, D-80339 München
Certificate: EX2A 17 05 70229 004
4. 2014/32/EU (MID)
- DIN EN 12480:2018
Certificates: N°: DE-17-MI002-PTB001 & DE-07-MI002-PTB018
The annex D is supervised by:
#0102 Physikalisch-Technische Bundesanstalt, Bundesallee 100, D-38116 Braunschweig
Certificate: DE-M-AQ-PTB009
5. 2011/65/EU (RoHS)
- EN IEC 63000
Karlsruhe, March 10
th
, 2020
M. Einhaus
Director Product Development
To Next Page
Loading...
