Need help?Do you have a question about the ITRON ACE6000 and is the answer not in the manual?
General| Voltage | 230V AC |
|---|---|
| Frequency | 50/60 Hz |
| Display | LCD |
| Communication | RS-485 |
| Temperature Range | +55°C |
| Current | 5A |
| Frequency Range | 45Hz to 65Hz |
| Storage Temperature | +70°C |
| Humidity | 95% RH (non-condensing) |
Precautions for safely isolating and handling meters before installation or removal.
Guidelines for safe meter installation, including isolation and circuit protection.
Safety advice for working with meters connected to Voltage and Current Transformers.
Description of the meter's integral Mutual Conductance Transformers and signal processing.
How meters can be configured to correct for measurement errors from CT/VT.
How meter data is saved in non-volatile memory during power outages.
Details on the super-capacitor and optional lithium battery for power backup.
Feature allowing meter reading during main network power loss using dedicated batteries.
Introduction to the various energy values measured by the meter.
Measurement of energy values in all four quadrants of the AC waveform.
Details of active and reactive energy quantities recorded by the meter.
Monitoring energy demand limitations and threshold parameters.
Programmable duration and modes (fixed/sliding) for calculating demand.
How the meter calculates demand, including maximum demand modes.
Sources that can trigger an end of integration period (EOI) event.
Modes for detecting and indicating excess demand above predefined thresholds.
Monitoring distribution-network voltage-quality parameters like cuts, sags, and swells.
Features designed to prevent tampering and detect attempted fraud.
Optional sensor for detecting magnetic fields used in anti-tamper attempts.
Overview of how the meter manages alarms and records events.
List of selectable logbook events for recording metering events.
Classification of alarms as Fatal or Non-fatal and their clearing methods.
Ways alarms are reported, including LCD display, control output, and SMS/email.
Mandatory safety requirements before and during meter installation.
Procedure for safely installing or replacing the meter's lithium battery.
Checks to be performed before connecting the mains supply to the installed meter.
Steps to check meter functionality after installation and connection.
How to seal the meter terminal cover against unauthorized access.
Descriptions and classifications for various non-fatal and fatal alarms.
To Next Page
