The ACE6000 is a static, polyphase, four-quadrant, multi-rate
meter. It is intended for large commercial to industrial
applications.
Depending on the factory configuration, the meter provides the following minimum features and functions:
Active, Reactive and Apparent energy (import and export)
Units - Watt (W), Kilowatt (kW) and Megawatt (MW)
Maximum 32 individual energy rate registers for 10 energy channels
(incremental or cumulative)
Up to 3 excess energy channels (included in the maximum number of
energy channels)
Up to 8 energy rates per channel
Multi-rate billing and switching
Billing for both energy and demand
Energy rate switching performed by internal clock/calendar
Up to 12 seasons
Up to 24 day profiles
Up to 16 switching times per day profile
Up to 100 special days (repetitive or non-repetitive)
Maximum 24 individual demand rate registers for 10 demand channels
Up to 8 energy rates per channel (3 peak values associated with each rate)
Up to 10 rates can be configured for excess demand (3 excess demand
control mode)
1 specific demand channel for cumulative excess demand
1 power factor channel
1 power factor register
2 independent sets of 8 recording channels giving up to 16 load profile channels
available to record every 1 minute up to every 60 minutes the following data:
Energy type quantity (per phase or aggregate)