To Next PageTo Next Page
Need help?Do you have a question about the ITRON CENTRON CP1S and is the answer not in the manual?
General| Brand | ITRON |
|---|---|
| Model | CENTRON CP1S |
| Category | Measuring Instruments |
| Language | English |
Explains the manual's content and structure.
Provides an overview of the CENTRON meter family.
Details the physical attributes of the meter and its components.
Lists the available metrology and personality modules.
Describes the functionality of the meter's display.
Outlines electrical and environmental specifications.
Instructions for inspecting the meter upon receipt.
Guidelines for proper storage of the meter.
Precautions for handling and unpacking the meter.
Criteria for choosing an installation location for the meter.
Procedures for connecting and installing the meter.
Steps for upgrading functionality by changing modules.
Explains the Hall Effect technology for measurement.
Details surge protection mechanisms used in the meter.
Describes the analog-to-digital conversion sampling process.
Explains how voltage and current are measured.
Describes the physical characteristics of the CP1S module.
Details the types of registers available for energy accumulation.
Explains the LCD display features and indicators.
Covers testing and maintenance procedures.
Describes the SCM protocol and data transmission.
Explains the IDM protocol and its use.
Details the physical construction of the CP1SR module.
Describes the registers used by the CP1SR module.
Explains the RF transmission cycle and frequency hopping.
Covers tamper detection mechanisms and counters.
Instructions for upgrading with the CP1SR module.
Outlines testing and maintenance for the CP1SR.
Identifies and describes the meter's controls and indicators.
Procedure for returning the meter to factory default settings.
Steps for applying power and starting the meter.
Instructions for de-energizing meter electronics.
Explains Normal Mode and Test Mode operations.
Details available display modes and their configurations.
Lists types of registers for energy and demand.
Describes meter interrogation and programming methods.
Explains TOU functionality for billing.
Covers load profile data storage and specifications.
Describes the event log for recording historical events.
Outlines meter security levels and access control.
Instructions for upgrading meter firmware.
Details various R300 option versions.
Overview of SiteScan system features.
Guidance on testing and maintaining the meter.
Explains the bit resolution for load profile data.
Sets lead/lag tolerances for current angles.
Checks phasor validity and phase rotation.
Checks phase voltage deviations against a tolerance.
Checks for configured current levels per phase.
Sets adjustable low current threshold.
Checks current phasor angle against defined envelope.
Detects DC presence using a comb filter method.
Illustrates an error scenario for harmonic distortion.
Explains the use of LEDs and annunciators for testing.
Details the IR LED for meter accuracy testing.
Describes the various annunciators on the meter display.
Procedure for testing using the IR LED.
Outlines a typical meter test sequence.
Lists hardware for field testing.
Procedure using an IR pulse adapter.
Procedure using a snap switch.
Lists fatal errors, causes, and descriptions.
Guidelines for proactive meter care.
Procedures for meter repairs.
