ITRON ACE6000 User Manual

67
10.1. Warnings
DANGER OF ELECTRIC SHOCK
Before and during installation of a meter, observe all requirements given in the Safety information.
In particular:
Meters must be installed only by suitably-qualified personnel.
Ensure that the meter supply cabling is isolated from the mains supply, and that the isolation
cannot be overridden by another person.
Following installation, ensure that the meter covers are correctly fitted and sealed to prevent
user access.
10.2. Environmental
ACE6000 meters are certified for indoor use only. Do not install meters outdoors unless they are housed in an
enclosure which can maintain the specified environmental requirements.
Parameter
Range
Temperature
-40°C to +70°C
Humidity
Up to 95% RH
Environmental protection
IP 54
10. Installation

ITRON ACE6000 Specifications

General

Voltage	230V AC
Frequency	50/60 Hz
Display	LCD
Communication	RS-485
Temperature Range	+55°C
Current	5A
Frequency Range	45Hz to 65Hz
Storage Temperature	+70°C
Humidity	95% RH (non-condensing)