Do you have a question about the ITRON EM512 TYPE 700 JV1 and is the answer not in the manual?
Category | Measuring Instruments |
---|---|
Model | EM512 TYPE 700 JV1 |
Manufacturer | ITRON |
Frequency | 50Hz |
Display | LCD |
Communication | RS485 |
Measurement Type | Energy |
Voltage Rating | 230V |
Current Rating | 5(6)A |
Discusses security aspects and features of tokens within the STS protocol.
Tokens generated for specific meter ranges, accepted only by the intended meter.
Tokens generated by any vending device, accepted by any STS meter for maintenance.
Introduces the EM512 Type 700 JV1 meter and its compatibility with the STS protocol.
Overview of LCD display, LEDs, pulse indicator, and optical probe on the meter.
Explains meter serial number, tamper, and credit indicator LEDs.
Explains various icons and their meanings displayed on the meter.
Details audible and visual low credit warnings with customizable thresholds.
Allows users to set low credit thresholds and buzzer interval times.
Lists tamper events, their LCD display, and LED status.
Details tamper switch functionality and negative credit handling.
Lists short codes and definitions for various tamper types.
Step-by-step guide to inputting a 20-digit token via keypad.
Shows LCD displays for accepted or rejected tokens.
Explains displays for no credit, credit available, and power overload.
Covers tamper states, lockouts, and old token indicators.
Explains displays for rejected, used, and invalid tokens.
Lists error status codes and their corresponding LCD display strings.
Lists the available data fields in the DBO output.
Provides sample data outputs for various meter parameters.
Lists methods that should not be used for cleaning the meter.
Outlines the steps for installing the EM512 Type 700 JV1 meter.
Covers site selection, installation height, and meter handling precautions.
Step-by-step guide for physically mounting the meter on the wall.
Details electrical connections, safety warnings, and screw types.