10
Meter programmable features
The EM512 TYPE 700 JV1 product is equipped with programmable features, which can be customized to
each customer’s specific needs.
Audible Low Credit Warning and Credits Indicator LED
When the credit available on the meter reaches the low credit threshold, the meter will signal this by change
the color of Credits Indicator LED from Green to Red (Blinking).
The value at which the Low Credit Threshold would enable can be set with a token. This feature can be done
onsite with a token supplied to the user. This token can work on any meter.
The Audible Low Credit Warning is a programmable feature, which will warn the user of a low credit level by
making an audible beep sound, the beep of sound more louder when the credit near to zero.
This is in addition to change the color of LED credit. This feature cannot be changed with a token.
User Programmable Features
The programming or setting of these features can be done by the user in the field
Low Credit Threshold
The Low Credit Threshold can be setting by using short code 456XX, where the XX is energy in kWh
(minimum 05 kWh)
Example:
The low credit = 20 kWh
Programmable interval Buzzer time
When the credit reaches the limit value is low, LED indication green turns to red flashes and buzzer
sounds, the sound can be stopped by pressing any key on the keypad.
If in XXX minutes later, no credit token is entered, the buzzer sounds again. The lower the credit
token so the faster the duration of sound.
The XXX minutes at the sound of buzzer can be adjusted by using short code 123XXX, where the
XXX is the time in minutes
Example:
The interval Buzzer time = 10 minutes
To Next Page
Loading...
Need help?
General
