Ivation IVADM10 - User Manual

PETITE DEHUMIDIFIER

User Manual

Introduction

Thank you for purchasing our IVADM10 Dehumidiﬁer, and

welcome to the Ivation™ family. This user manual is meant

to oer you a brief walkthrough of the device’s features and

usage protocols. We hope you ﬁnd this manual helpful. For

additional information and technical support, please feel

encouraged to contact our help team at info@myivation.com.

Box Contents

1 x IVADM10 Dehumidiﬁer

1 x Water Tank

1 x Power Cord

1 x User Manual

Parts & Controls

Important Instructions

Intended Use

This device is intended for use in the removal of excess

moisture from smaller rooms such as studies, walk-in

closets and bathrooms. Other than the removable water

tank, this device is not user serviceable and should not be

disassembled. Any use other than that described above

will lead to damage to the product and may present

additional risks.

How Does it Work?

The IVADM10 Dehumidiﬁer works by way of thermoelectric

cooling, which uses what’s known as the Peltier eect to

create a heat ﬂux between the junction of two dierent

types of materials. Using no compressors or moving parts,

the device pulls moisture from the air around it, removing

muskiness and dampness from the room.

Safety Instructions

If damage is incurred as a result of non-compliance with these

operating instructions, manufacture’s guarantee will be voided.

Ivation™ assumes no liability for personal injury or damage to

property caused by incorrect handling or non-observance of

the safety instructions.

1. Keep unit in upright position whenever in use.

2. To avoid electric shock, avoid opening unit.

3. Always turn device o when not in use.

4. Avoid using power adapter in excessively wet area.

5. Ensure that inlet and outlet grilles are unobstructed.

6. Keep device away from reach of children.

Operation

Basics:

- To remove excess moisture from small rooms, place IVADM10

Dehumidiﬁer in preferred area.

- Insert smaller end of AC/DC Power Adapter (#11) into DC Power

Socket (#10).

- Connect other end to wall socket.

- Toggle On/O Switch (#3) to On position.

- To turn unit o at any time, toggle On/O Switch (#3) to O

position ﬁrst, then unplug DC Power Adapter (#11).

Emptying Water Tank:

- The IVADM10 Dehumidiﬁer will automatically turn o once

tank is full.

- The Yellow “Full” LED (#2) will turn on.

- Before removing water tank, toggle On/O Switch (#3) to

O position.

- Insert two ﬁngers into Pull-Out Opening (#7) and gently

pull out.

- Pull out plug from Water Displacement Hole (#8).

- Pour collected water out from tank into sink or toilet.

- Reinsert plug and slide tank back into device until it clicks.

- Device is now ready for use again.

Technical Speciﬁcations

Capacity: Approximately 6.08 Ounces/Day at 86°F, 80% RH

Water Tank Capacity: 16.9 Ounces

Cooling Element: Thermoelectric Peltier Module

Fan: 80mm x 80mm Brushless Motor

Power Adapter: 7.5v DC 1.8Amp

Power Consumption: 13.5w

Water Level Detector: Auto-O When Full w/Yellow “Full” LED

Dimensions: 6.1” x 8.66” x 5.11”

Maintenance

Always turn IVADM10 Dehumidiﬁer o and disconnect power

cord before cleaning unit. Use a piece of soft cloth to clean

product surface, or use soft-bristled brush to wipe dust

o air inlet grills.

Distributed by

C&A Marketing, Inc.

2 Bergen Turnpike

Ridgefield Park, NJ 07660

info@myivation.com

MADE IN CHINA

IVATION is a trademark of

C&A IP Holdings, LLC

IVATION HOME

1. Green “On” LED

2. Yellow “Full” LED

3. On/O Switch

4. Air Inlet Grill

5. Dry Air Outlet

Grill

6. Removable

Water Tank

7. Pull-Out

Opening

8. Water

Displacement

Hole w/Plug

9. Hydraulic Cut-O

10. DC Power Socket

11. AC/DC Power

Adapter

Need help?

Do you have a question about the Ivation IVADM10 and is the answer not in the manual?

The IVADM10 Petite Dehumidifier is a compact device designed to remove excess moisture from small rooms, such as studies, walk-in closets, and bathrooms. It operates using thermoelectric cooling, also known as the Peltier effect, which creates a heat flux between two different types of materials. This method allows the dehumidifier to function without compressors or moving parts, effectively pulling moisture from the air to eliminate muskiness and dampness.

Important Technical Specifications:

Capacity: Approximately 6.08 ounces per day at 86°F and 80% relative humidity.
Water Tank Capacity: 16.9 ounces.
Cooling Element: Thermoelectric Peltier Module.
Fan: 80mm x 80mm Brushless Motor.
Power Adapter: 7.5V DC, 1.8 Amp.
Power Consumption: 13.5 Watts.
Water Level Detector: Features an auto-off function when the water tank is full, accompanied by a yellow "Full" LED indicator.
Dimensions: 6.1" x 8.66" x 5.11".

Usage Features:

The device is straightforward to operate. To begin, place the IVADM10 Dehumidifier in the desired area. Connect the smaller end of the AC/DC Power Adapter (#11) into the DC Power Socket (#10) on the unit, and then plug the other end into a wall socket. To turn the unit on, toggle the On/Off Switch (#3) to the "On" position. A green "On" LED (#1) will illuminate to indicate that the device is active.

The IVADM10 Dehumidifier features an automatic shut-off mechanism when its water tank is full. At this point, the yellow "Full" LED (#2) will turn on, signaling that the tank needs to be emptied. To empty the water tank, first toggle the On/Off Switch (#3) to the "Off" position. Then, insert two fingers into the Pull-Out Opening (#7) and gently pull the tank out. Remove the plug from the Water Displacement Hole (#8) and pour the collected water into a sink or toilet. After emptying, reinsert the plug and slide the tank back into the device until it clicks into place. The device is then ready for use again.

Safety Instructions:

To ensure safe operation and maintain the manufacturer's guarantee, several safety guidelines must be followed:

Always keep the unit in an upright position when in use.
To prevent electric shock, do not attempt to open the unit.
Always turn the device off when not in use.
Avoid using the power adapter in excessively wet areas.
Ensure that the inlet and outlet grilles are unobstructed to maintain proper airflow.
Keep the device out of reach of children.

Maintenance Features:

Regular maintenance helps ensure the longevity and optimal performance of the IVADM10 Dehumidifier. Before cleaning the unit, always turn it off and disconnect the power cord. The exterior surface of the product can be cleaned with a soft cloth. For cleaning dust from the air inlet grilles, a soft-bristled brush is recommended. The device is not user-serviceable beyond emptying the water tank; any disassembly is not recommended and may void the warranty or present additional risks.