5
INSTRUCTIONS
INSTRUCTIONS
PLANTING INSTRUCTIONS
PREPARING NUTRIENT SOLUTION
1. Pour 100 ml of fresh, clean water into the bottle of nutrient A
powder. Next, mix and stir the powder and liquid in the bottle.
Then, pour another 100 ml of water into the bottle of nutrient
B powder and stir the contents in the bottle.
2. Shake the bottles thoroughly to fully mix the contents.
3. Pour five (5) ml of nutrient A liquid solution into the bottle
cap. Then, pour five (5) ml of nutrient B liquid solution into
the other bottle cap. (The bottle caps also serve as measuring
cups in milliliters.)
4. Add the bottle cap of five (5) ml nutrient A solution into one
(1) liter of water, then stir. Next, add the bottle cap of five (5)
ml nutrient B solution to the same liter of water.
A B
NOTE: The amount of water you are using determines how
much nutrient solution you should add to the water. Add
five (5) ml of nutrient A solution and five (5) ml of nutrient B
solution to one (1) liter of water for a total of 10 ml, add 10 ml
of each liquid solution if you have two (2) liters of water, and
add 15 ml of each liquid solution if you have three (3) liters. The
water tank holds 3.5 liters of liquid all together.
5. Stir until the solutions are equally distributed in the water.
CAUTION: Nutrients have a storage life of two (2) years
in unopened bottles if stored away from sunlight at room
temperature. Mixed nutrient solution with added water has a
storage life of five (5) months if stored away from sunlight.
To Next Page
Loading...