6
INSTRUCTIONS
INSTRUCTIONS
PREPARING GARDEN GROWER
1. Remove the water tank plug located on the water tank cover.
2. Pour the liter of prepared A/B nutrient solution into the
water tank. For the beginning of the planting process, it is
recommended to add water slightly above the MAX indicator
located under the water tank plug.
3. Push one or two (1-2) seeds (not included) into the sponge of
the basket. (It is recommended to let seeds soak in warm water
for an hour before placing them in grower for most eective
sprouting.)
4. Place baskets into the pods of the garden grower located on
the water tank cover. (The grower can hold up to seven baskets
at once.)
NOTE: Use the extendable rod to lower the lighting panel close
to the baskets, maximizing light intensity on seeds. Raise the
lighting panel as plants grow taller. It is completely possible
that some seeds may not grow. Every seed works dierently,
To Next Page
Loading...
Need help?
General
