What to do if my Ivation Steam Cleaner has no steam?
If no steam is coming out of your Ivation Steam Cleaner, first check the hose for any bends that might be blocking the steam. If the hose is clear, the water tank may be empty. Refill the water tank and try again.
Why Ivation Steam Cleaner won't heat up?
If your Ivation Steam Cleaner won't heat up, start by checking the plug and power supply to ensure it's properly connected. If it still doesn't heat, disconnect it immediately and contact Ivation customer support, as the unit may be damaged.
Why is my Ivation Steam Cleaner spitting out water instead of steam?
If your Ivation Steam Cleaner is emitting water instead of steam, it could be due to a few reasons: * Steam may be condensed in the hose. Direct the handle towards a bucket or sink to release the excess water. * The water might not be hot enough yet. Wait for the steam pressure to increase. * The water tank might be overfilled. In this case, turn off the power, allow the unit to cool down, and then drain the excess water.
How to remove fill cap from Ivation Steam Cleaner?
If the fill cap of your Ivation Steam Cleaner won't come off, it's likely because the unit is still under pressure. Release the pressure by releasing the steam trigger. This should allow you to remove the cap.
What to do if Ivation Steam Cleaner steam flow is irregular?
If the steam flow from your Ivation Steam Cleaner is irregular and the unit is making a coughing noise, there may be a blockage preventing the steam from flowing freely. Clean the water tank to resolve this issue.
Why is the handle of my Ivation Steam Cleaner very hot?
It's normal for the handle of your Ivation Steam Cleaner to get hot, as steam is naturally hot. If the heat is bothersome, try wearing gloves while using the appliance.
Details on the steam cleaner handle's safety lock and trigger mechanism for releasing steam.
Instructions for enabling continuous steam output using the handle's locking feature.
Operating Environment| max temperature | 338°F (170°C) |
|---|---|
| max pressure | 65 PSI (5 bar) |
| working pressure | 29–65 PSI (2–5 bar) |
Power| power consumption | 1800 W |
|---|---|
| intensity | 15.0 A |
| voltage | 120 V |
| frequency | 60 Hz |
Water Tank| water tank capacity | 3.8 pints (1.8 L) |
|---|---|
| max tank fill capacity | 4 pints (1.95 L) |
| warm up time | 7 min |
Weight and Dimensions| tube length | 1.45m |
|---|---|
| net weight | 8 lbs. (3.6 kg) |
| steam compartment material | stainless steel |
To Next Page