EasyManuals Logo

Ivation IVASTEAMR20 User Manual

Ivation IVASTEAMR20
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
PARTS
1. Steam handle
2. Steam trigger
3. Steam trigger lock latch
4. Steam hose
5. Tank fill cap
6. Pressure gauge
7. Brush holder
8. Floor scrub brush
9. Carry handle
10. Measuring cup
11. Funnel
12. On/o switch
13. Heat light
14. Extension tubes
15. Wheel
16. Rotating brush
17. Window squeegee
18. Round bristle brush (large)
19. Round bristle brush (small)
20. Angled power jet tip
21. Floor scrub brush adapter
22. Small tip adapter
23. Cleaning cloth
UNDERSTANDING THE STEAM CLEANER
During use, the orange steam indicator light may turn on again. This means that the steam pressure may
be too low. If this happens, release the steam trigger for a few seconds. When the orange steam indicator
light turns o again, you can resume using the product.
If the pressure drops too low, the pressure gauge will appear in the yellow zone. This means that the steam
flow may not be sucient, depending on the accessory used. If this happens, release the steam trigger and
wait until the pressure gauge reaches the red zone again.
When activating the steam trigger initially, water may come out instead of steam. This is normal, as it can
take some time for the water in the unit to convert into steam. Wait a little bit, and steam should start to
come out instead of water.
- If there is still water coming out, it may be residual water trapped in the hose from the previous use. If this
happens, point the handle over a bucket or sink and pull the steam trigger until the water is drained from
the unit.
8
3
4
5
6
15
12
13
10117
1
2
14
9
17
17
23
23
22
22
21
21
20
20
19
19
18
18
6
1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ivation IVASTEAMR20 and is the answer not in the manual?

Ivation IVASTEAMR20 Specifications

Operating Environment IconOperating Environment
max temperature338°F (170°C)
max pressure65 PSI (5 bar)
working pressure29–65 PSI (2–5 bar)
Power IconPower
power consumption1800 W
intensity15.0 A
voltage120 V
frequency60 Hz
Water Tank IconWater Tank
water tank capacity3.8 pints (1.8 L)
max tank fill capacity4 pints (1.95 L)
warm up time7 min
Weight and Dimensions IconWeight and Dimensions
tube length1.45m
net weight8 lbs. (3.6 kg)
steam compartment materialstainless steel