Iveco N60 ENT M40 User Manual

copertina NEF series electronic 20-11-2006 10:04 Pagina 1
Colori compositi
C M Y CM MY CY CMY K
USE AND MAINTENANCE
USO E MANUTENZIONE
UTILISATION ET ENTRETIEN
BETRIEB UND WARTUNG
USO Y MANTENIMIENTO
NEF SERIES
E LECTRONIC INJECTION SYSTEM
Publication edited by
Marketing - Adv. & Promotion
Print L31900018 - 10/06
MARINE ENGINES

Iveco N60 ENT M40 Specifications

General

Brand	Iveco
Model	N60 ENT M40
Category	Engine
Language	English

Summary

INTRODUCTION

GENERAL INFORMATION

GUARANTEE

Explains conditions for warranty validity and proper engine performance.

SPARE PARTS

Emphasizes the use of original spare parts for engine integrity.

LIABILITY

Defines the manufacturer's liability based on maintenance and operations.

SAFETY

ENGINE TECHNICAL DATA N40 ENT M25

ENGINE TECHNICAL DATA N60 ENT M37 / M40

ENGINE TECHNICAL DATA N67 ENT M45

SIGNS

USE

PRELIMINARY CHECKS

Lists essential checks to perform before starting the engine each time.

STARTING AND STOPPING THE ENGINE

STARTING AND STOPPING THE ENGINE FROM THE ANALOGUE CONTROL PANEL

STARTING AND STOPPING THE ENGINE FROM THE DIGITAL CONTROL PANEL

Stopping the engine

RECOGNISING ALARMS

Operation

Alpha-numeric display

Explains the information provided by the alpha-numeric display on the control panel.

MANAGING THE ENGINE FROM THE RELAY BOX

Start-up procedure

Outlines the steps for starting the engine from the Relay box.

Running speed management procedure

Describes how to control engine speed using the Relay box.

Stopping procedure

Outlines the steps for stopping the engine using the Relay box.

Self-diagnosis procedure

Explains how to initiate the self-diagnosis function via the Relay box.

FOR PROPER USE OF THE ENGINE

SPECIAL WARNINGS

Coolant temperature high

Advises on actions to take if the engine coolant temperature is too high.

Low lubricant pressure

Advises on actions to take if the engine oil pressure is low.

Water in the fuel pre-filter

Air filter blocked and exhaust circuit inefficient

Alternator malfunction

Irregularities in the electrical system

RUNNING IN

REFUELLING

Low temperature diesel

Discusses diesel fuel specifications suitable for low temperatures.

Filling up with marine gear oil

Refers to the marine gear manufacturer's manual for oil type and amount.

CONTROLS AND MAINTENANCE

MAINTENANCE PERSONNEL

Details the qualifications and roles of personnel performing maintenance.

ACCIDENT PREVENTION

Provides essential safety measures to prevent accidents during maintenance.

Check corrosion of zinc anodes

Check state of oil vapour filter

Changing engine oil

Changing the engine oil filter

REQUIREMENTS

HOW TO PROCEED

Check oil in engine

Details the procedure for checking the engine oil level using the dipstick.

Check oil level in marine gear

Check coolant level

Check exhaust pipe/s for damage

Draining water from the fuel pre-filter

Checking the level of electrolyte solution in the batteries

Cleaning the air filter

Changing the fuel filter

Changing the fuel pre-filter

Check tension and state of the auxiliary member drive belt

Replace coolant

Change oil vapour filter