Need help?Do you have a question about the Iveco Aifo 8001 and is the answer not in the manual?
General recommendations for safe engine operation and modification.
Safety measures and procedures to follow during maintenance operations.
Guidelines for maintaining the engine cooling system safely.
Valve timing specifications for the 8031 i 05 engine.
Details on the fuel system for the 8031 i 05 engine.
Information on the lubrication system for the 8031 i 05 engine.
Valve timing specifications for the 8041 i 05 engine.
Details on the fuel system for the 8041 i 05 engine.
Information on the lubrication system for the 8041 i 05 engine.
Combined specifications for fuel, timing, and lubrication of 8041 Si 25.
Details on the turbocharger system and its operation.
Procedures for checking engine oil and coolant levels.
Steps for checking battery and performing engine oil changes.
Guidance on checking drive belts and maintaining filters.
Procedures for checking valve clearance and fuel filters.
Instructions for checking and cleaning the turbocharger.
Requirements for valve regrinding and cylinder head bolt torque.
Torque specifications for main engine components and damper replacement.
Engine specifications relevant to genset models.
Introduction to the maintenance of dry air filters for genset engines.
Detailed steps for cleaning and checking the external air filter cartridge.
Guidance on replacing safety cartridges and resetting the air filter clogging indicator.
To Next Page
General
