r
,
24
CHECKING DRIVE BELT TENSION AND CONDITIONS
Check belt tension: give at arrow must be 1to
1.5.
Ta
increase tension of the water pump driving
be!ts:
•
UnloQse
alternator check nuts A and
B,
•
Move
alternator
outvv3rd
and retighten nuts.
CHANGING OIL FILTER CARTRIDGES
00
not
exceed the specifi'ed limit. With pfugged filter
a!l
the
oil
in the circuit is
no
langaT
filtered.
On
a new af
overhauJed
engine replace the cartridge after
the
running-in pe-
riod.
N.B.:
Make
sure that
the
new cartridges
are
of the same type
as
the
old
ones.
To Next Page
Loading...
