DIGISPENSE 3009 CONTROLLER MODULE, STYLE B Page 3-30
29 October, 2019 IVEK Corp. P03R017E
Fault Screen Description - The Fault screen displays faults which cause the system to stop operating. The current
permission level determines which push-buttons are available as shown.
The Start push-button is not functional, but the Stop push-button is functional while this screen is visible.
The Fault description lists the operational fault. The error code is a numerical value and is to be used by IVEK
Technical Service personnel. Normal operational faults will cause an error code of '0'.
Status - The status indicates the operational state of the system. Refer to section 3.3.8 for an explanation of
each status type.
To Next Page
Loading...