IVEK DIGISPENSE 3009 - Page 57

DIGISPENSE 3009 CONTROLLER MODULE, STYLE B Page 3-57
29 October, 2019 IVEK Corp. P03R017E
3.4.7.10 Setup E Screen
Keylock/Supervisor
D = Display P = Push-button Accessible I/O Test
C = Display/Change N = Not Accessible/Viewable Operator
0 SETUP E <— status —>
2 LOGIC I/O GATEWAY = DISABLED
3
4 AUX OUT 1 TRUE = CONDUCTING
5 AUX OUT 2 TRUE = CONDUCTING
6 OUTPUT 1 TRUE = CONDUCTING
7 OUTPUT 2 TRUE = NOT CONDUCTING
8 OUTPUT 3 TRUE = CONDUCTING
9 OUTPUT 4 TRUE = CONDUCTING
10 RECIPE OUT TRUE = CONDUCTING
11
12
13
14 SETUP D SYSTEM
15 SCREEN INFO
----- Displays the Controller Module Status ........ D D D
----- Display/change LOGIC I/O gateway setting D D C
----- Display/change the aux out 1 true setting ... D D C
----- Display/change the aux out 2 true setting ... D D C
----- Display/change the output 1 true setting ..... D D C
----- Display/change the output 2 true setting ..... D D C
----- Display/change the output 3 true setting ..... D D C
----- Display/change the output 4 true setting ..... D D C
----- Display/change the recipe out true setting .. D D C
The following screens are accessible from
this screen based on the system status.
Setup D ................................................................ P P P
System Info .......................................................... P P P