DIGISPENSE 3009 CONTROLLER MODULE, STYLE B Page 3-66
29 October, 2019 IVEK Corp. P03R017E
System Info Screen Description - The System Info screen displays information about the Controller Module. The
current permission level determines which push-buttons are available as shown.
The Start push-button is not functional, but the Stop push-button is functional while this screen is visible.
Status - The status indicates the operational state of the system. Refer to section 3.3.8 for an explanation of each
status type.
Firmware Version - The Firmware Version displays the current version of firmware installed on the Controller Module.
Firmware CRC - The Firmware CRC confirms the integrity of the firmware in the controller.
Serial Number - The Serial Number is a unique identifier assigned to the Controller Module and should be used when
calling IVEK Corporation with problems or questions. The serial number should match the serial number on the tag
located on the rear of the Controller Module.
Asserts SW - For IVEK use only.
Asserts SW Code - For IVEK use only.
Asserts HW - For IVEK use only.
Assert HW Code - For IVEK use only.
To Next Page
Loading...